REST API

This document describes the version 1 of the MaxScale REST API.

Note About Syntax

Although JSON does not define a syntax for comments, some of the JSON examples have C-style inline comments in them. These comments use // to mark the start of the comment and extend to the end of the current line.

Configuration

Read the REST API section of the configuration guide for more details on how to configure the REST API.

Authentication

The MaxScale REST API uses HTTP Basic Access authentication with the MaxScale administrative interface users. The default user is admin:mariadb.

It is highly recommended to enable HTTPS on the MaxScale REST API to make the communication between the client and MaxScale secure. Without it, the passwords can be intercepted from the network traffic. Refer to the Configuration Guide for more details on how to enable HTTPS for the MaxScale REST API.

For more details on how administrative interface users are created and managed, refer to the MaxCtrl documentation as well as the documentation of the users resource.

JSON Web Tokens

MaxScale supports authentication via JSON Web Tokens.

GET /v1/auth

The /v1/auth endpoint can be used to generate new tokens which are returned in the following form.

{
    "meta": {
        "token": "eyJhbGciOiJIUzI1NiJ9.eyJhdWQiOiJhZG1pbiIsImV4cCI6MTU4MzI1NDE1MSwiaWF0IjoxNTgzMjI1MzUxLCJpc3MiOiJtYXhzY2FsZSJ9.B1BqhjjKaCWKe3gVXLszpOPfeu8cLiwSb4CMIJAoyqw"
    }
}

Note that by default the /auth endpoint requires the connection to be encrypted (HTTPS) and attempts to use it without encryption will be treated as an error. To allow use of the /auth endpoint without encryption, use admin_secure_gui=false.

If the token is used to authenticate users in a web browser, the token can be optionally stored in cookies. This can be enabled with the persist=yes parameter in the request:

GET /v1/auth?persist=yes

When the token is stored in the cookies, it will be stored in the token_sig cookie using the SameSite=Strict and HttpOnly cookie options. This means the JavaScript context of the browser will not have access to it. This is done to prevent CSRF attacks.

By default, the generated tokens are valid for 8 hours. The token validity period can be set with the max-age request parameter:

GET /v1/auth?max-age=28800

When max-age is combined with persist, the Max-Age cookie option is also set to the same value.

To use the token for authentication, the generated token must be presented in the Authorization header with the Bearer authentication scheme. For example, the token above would be used in the following manner:

Authorization: Bearer eyJhbGciOiJIUzI1NiJ9.eyJhdWQiOiJhZG1pbiIsImV4cCI6MTU4MzI1NDE1MSwiaWF0IjoxNTgzMjI1MzUxLCJpc3MiOiJtYXhzY2FsZSJ9.B1BqhjjKaCWKe3gVXLszpOPfeu8cLiwSb4CMIJAoyqw

If MaxScale is restarted, all generated tokens are invalidated.

/auth Request Parameters

The /auth endpoint supports the following request parameters that must be given in the HTTP query string.

• max-age

• Sets the token maximum age in seconds. The default is max-age=28800. Only positive values between 1 and 2147483646 are accepted and if a non-positive or a non-integer value is found, the parameter is ignored.

• persist

• Store the generated token in cookies instead of returning it as the response body.

  This parameter expects only one value, yes, as its argument. When persist=yes is set, the token is stored in the token_sig cookie and the response is 204 No Content instead of 200 OK.

  The token_sig cookie contains the JWT and is stored as a HttpOnly cookie which prevents access to from JavaScript. This is done to mitigate any attacks that might leak the token.

Resources

The MaxScale REST API provides the following resources. All resources conform to the JSON API specification.

• maxscale
• services
• servers
• listeners
• filters
• monitors
• sessions
• users
• sql

In addition to the named resources, the REST API will respond with a HTTP 200 OK response to GET requests on the root resource (/) as well as the namespace root resource (/v1/). These can be used for HTTP health checks to determine whether MaxScale is running.

API Versioning

All of the current resources are in the /v1/ namespace of the MaxScale REST API. Further additions to the namespace can be added that do not break backwards compatibility of any existing resources. What this means in practice is that:

• No resources or URLs will be removed
• The API will be JSON API compliant

Note that this means that the contents of individual resources can change. New fields can be added, old ones can be removed and the meaning of existing fields can change. The aim is to be as backwards compatible as reasonably possible without sacrificing the clarity and functionality of the API.

Since MaxScale 2.4.0, the use of the version prefix /v1/ is optional: if the prefix is not used, the latest API version is used.

Resource Relationships

All resources return complete JSON objects. The returned objects can have a relationships field that represents any relations the object has to other objects. This closely resembles the JSON API definition of links.

In the relationships objects, all resources have a self link that points to the resource itself. This allows easy access to the objects pointed by the relationships as the reply URL is included in the response itself.

To create a relationship between two objects, define it in the initial POST request. To modify the relationships of existing objects, perform a PATCH request with the new definition of the relevant relationship. To completely remove all relationships from an object, the data field of the corresponding relationship object must be set to an empty array.

The following lists the resources and the types of links each resource can have in addition to the self link. Examples of these relationships can be seen in the resource documentation.

• services - Service resource

• servers

  List of servers used by the service

• services

  List of services used by the service

• filters

  List of filters used by the service

  NOTE: This is an ordered relationship where the order of the filters defines the order in which they process queries.

• listeners

  List of listeners used by the service

• monitors - Monitor resource

• servers

  List of servers used by the monitor

• filters - Filter resource

• services

  List of services that use this filter

  NOTE: This is a one-way relationship that can only be modified from the services resource.

• servers - Server resource

• services

  List of services that use this server

• monitors

  List of monitors that use this server

• listeners - Listener resource

• services

  The service that the listener points to

Common Request Parameters

All the resources that return JSON content also support the following parameters. Parameters are given in the HTTP query string: https://localhost:8989/v1/servers?pretty=true&fields[servers]=state.

• pretty

• Pretty-print output.

  If this parameter is set to true then the returned objects are formatted in a more human readable format. If the parameter is set to false then the returned objects are formatted in a compact format. All resources support this parameter. The default value for this parameter is true.

• fields[TYPE]=field1,field2...

• Return a Sparse Fieldset

  This parameter controls which fields are returned in the REST API response. The TYPE value in the fields parameter must be the resource type that is being retrieved (i.e. the servers in /v1/servers and /v1/server/server1). The value of the parameter must be a comma-separated list of JSON Pointers that mark which fields of the object to return. Only fields in objects in the attributes and relationships objects are inspected. This means that if the path marked by the JSON Pointer contains an array in it, it will not advance past this array.

  For example, to return only the server state output from the /servers endpoint, the fields[servers]=state parameter can be used. This would return only the data.attributes.state part of the resource. To return the nested value data.attributes.statistics.connections, the corresponding parameter would be fields[servers]=statistics/connections.

• filter=json_ptr=json_value

• Filter the output of the result

  This parameter controls which rows are returned in a REST API response that returns an array in the data member (i.e. a request to a resource collection). Requests to individual resources are not filtered.

  The argument to the filter parameter must be a key-value pair with a valid JSON Pointer as the key and a valid JSON type as the value. The comparison is done for each individual object in the data array of the result. For example, if the object stored in data[0] has a value pointed by the given JSON pointer and that value compares equal to the given value, the array row is kept in the result.

  A practical use for this parameter is to return only sessions for a particular service. For example, to return sessions for the RW-Split-Router service, the filter=/relationships/services/data/0/id="RW-Split-Router" parameter can be used. Note the double quotes around the "RW-Split-Router", they are required to correctly convert strings into JSON values.

• page[size]

• The number of elements that are returned for resource collections. By default all elements in the resource collection are returned. The value must be a valid positive integer, otherwise the parameter is ignored. If pagination is used, the links object will have pagination links to the next page if more elements are available.

• page[number]

• How many pages of results to skip. The first page of results starts from 0 and each page has no more than page[size] elements. If defined, page[size] must also be defined, otherwise this parameter is ignored. This should be considered pseudo-pagination as the results are not guaranteed to be consistent between requests.

• sync

• Control configuration synchronization.

  If this parameter is set to false then the configuration synchronization is disabled for this request. This can be used to perform configuration changes when MaxScale is unable to reach the cluster used to synchronize the configuration. The modifications to the local configuration will be overwritten when the next modification to the cluster's configuration is done which means this should only be used to perform temporary fixes.

HTTP Headers

Request Headers

REST makes use of the HTTP protocols in its aim to provide a natural way to understand the workings of an API. The following request headers are understood by this API.

Authorization

Credentials for authentication. This header should consist of a HTTP Basic Access authentication type payload which is the base64 encoded value of the username and password joined by a colon e.g. Base64("maxuser:maxpwd").

Content-Type

All PUT and POST requests must use the Content-Type: application/json media type and the request body must be a complete and valid JSON representation of a resource. All PATCH requests must use the Content-Type: application/json media type and the request body must be a JSON document containing a partial definition of the modified resource.

Host

The address and port of the server.

If-Match

The request is performed only if the provided ETag value matches the one on the server. This field should be used with PATCH requests to prevent concurrent updates to the same resource.

The value of this header must be a value from the ETag header retrieved from the same resource at an earlier point in time.

If-Modified-Since

If the content has not changed the server responds with a 304 status code. If the content has changed the server responds with a 200 status code and the requested resource.

The value of this header must be a date value in the "HTTP-date" format.

If-None-Match

If the content has not changed the server responds with a 304 status code. If the content has changed the server responds with a 200 status code and the requested resource.

The value of this header must be a value from the ETag header retrieved from the same resource at an earlier point in time.

If-Unmodified-Since

The request is performed only if the requested resource has not been modified since the provided date.

The value of this header must be a date value in the "HTTP-date" format.

X-HTTP-Method-Override

Some clients only support GET and PUT requests. By providing the string value of the intended method in the X-HTTP-Method-Override header, a client can, for example, perform a POST, PATCH or DELETE request with the PUT method (e.g. X-HTTP-Method-Override: PATCH).

If this header is defined in the request, the current method of the request is replaced with the one in the header. The HTTP method must be in uppercase and it must be one of the methods that the requested resource supports.

Response Headers

Allow

All resources return the Allow header with the supported HTTP methods. For example the resource /services will always return the Accept: GET, PATCH, PUT header.

Accept-Patch

All PATCH capable resources return the Accept-Patch: application/json-patch header.

Date

Returns the RFC 1123 standard form date when the reply was sent. The date is in English and it uses the server's local timezone.

ETag

An identifier for a specific version of a resource. The value of this header changes whenever a resource is modified via the REST API. It will not change if an internal MaxScale event (e.g. server changing state or statistics being updated) causes a change.

When the client sends the If-Match or If-None-Match header, the provided value should be the value of the ETag header of an earlier GET.

Last-Modified

The date when the resource was last modified in "HTTP-date" format.

Location

If an out of date resource location is requested, a HTTP return code of 3XX with the Location header is returned. The value of the header contains the new location of the requested resource as a relative URI.

WWW-Authenticate

The requested authentication method. For example, WWW-Authenticate: Basic would require basic HTTP authentication.

Mxs-Warning

This header is used for sending generic warnings to clients about actions that were successful and valid but could cause problems in the future. Currently these are used to indicate when a configuration change was made to a static object and an overriding configuraiton is created or when a static object is being deleted at runtime.

The content of the header is the human-readable warning that should be displayed to a user.

Response Codes

Every HTTP response starts with a line with a return code which indicates the outcome of the request. The API uses some of the standard HTTP values:

2xx Success

• 200 OK

• Successful HTTP requests, response has a body.

• 201 Created

• A new resource was created.

• 202 Accepted

• The request has been accepted for processing, but the processing has not been completed.

• 204 No Content

• Successful HTTP requests, response has no body.

3xx Redirection

This class of status code indicates the client must take additional action to complete the request.

• 301 Moved Permanently

• This and all future requests should be directed to the given URI.

• 302 Found

• The response to the request can be found under another URI using the same method as in the original request.

• 303 See Other

• The response to the request can be found under another URI using a GET method.

• 304 Not Modified

• Indicates that the resource has not been modified since the version specified by the request headers If-Modified-Since or If-None-Match.

• 307 Temporary Redirect

• The request should be repeated with another URI but future requests should use the original URI.

• 308 Permanent Redirect

• The request and all future requests should be repeated using another URI.

4xx Client Error

The 4xx class of status code is when the client seems to have erred. Except when responding to a HEAD request, the body of the response MAY contains a JSON representation of the error.

{
    "error": {
        "detail" : "The new `/servers/` resource is missing the `port` parameter"
    }
}

The error field contains a short error description and the description field contains a more detailed version of the error message.

• 400 Bad Request

• The server cannot or will not process the request due to client error.

• 401 Unauthorized

• Authentication is required. The response includes a WWW-Authenticate header.

• 403 Forbidden

• The request was a valid request, but the client does not have the necessary permissions for the resource.

• 404 Not Found

• The requested resource could not be found.

• 405 Method Not Allowed

• A request method is not supported for the requested resource.

• 406 Not Acceptable

• The requested resource is capable of generating only content not acceptable according to the Accept headers sent in the request.

• 409 Conflict

• Indicates that the request could not be processed because of conflict in the request, such as an edit conflict be tween multiple simultaneous updates.

• 411 Length Required

• The request did not specify the length of its content, which is required by the requested resource.

• 412 Precondition Failed

• The server does not meet one of the preconditions that the requester put on the request.

• 413 Payload Too Large

• The request is larger than the server is willing or able to process.

• 414 URI Too Long

• The URI provided was too long for the server to process.

• 415 Unsupported Media Type

• The request entity has a media type which the server or resource does not support.

• 422 Unprocessable Entity

• The request was well-formed but was unable to be followed due to semantic errors.

• 423 Locked

• The resource that is being accessed is locked.

• 428 Precondition Required

• The origin server requires the request to be conditional. This error code is returned when none of the Modified-Since or Match type headers are used.

• 431 Request Header Fields Too Large

• The server is unwilling to process the request because either an individual header field, or all the header fields collectively, are too large.

5xx Server Error

The server failed to fulfill an apparently valid request.

• 500 Internal Server Error

• A generic error message, given when an unexpected condition was encountered and no more specific message is suitable.

• 501 Not Implemented

• The server either does not recognize the request method, or it lacks the ability to fulfill the request.

• 502 Bad Gateway

• The server was acting as a gateway or proxy and received an invalid response from the upstream server.

• 503 Service Unavailable

• The server is currently unavailable (because it is overloaded or down for maintenance). Generally, this is a temporary state.

• 504 Gateway Timeout

• The server was acting as a gateway or proxy and did not receive a timely response from the upstream server.

• 505 HTTP Version Not Supported

• The server does not support the HTTP protocol version used in the request.

• 506 Variant Also Negotiates

• Transparent content negotiation for the request results in a circular reference.

• 507 Insufficient Storage

• The server is unable to store the representation needed to complete the request.

• 508 Loop Detected

• The server detected an infinite loop while processing the request (sent in lieu of 208 Already Reported).

• 510 Not Extended

• Further extensions to the request are required for the server to fulfil it.

Response Headers Reserved for Future Use

The following response headers are not currently in use. Future versions of the API could return them.

• 206 Partial Content

• The server is delivering only part of the resource (byte serving) due to a range header sent by the client.

• 300 Multiple Choices

• Indicates multiple options for the resource from which the client may choose (via agent-driven content negotiation).

• 407 Proxy Authentication Required

• The client must first authenticate itself with the proxy.

• 408 Request Timeout

• The server timed out waiting for the request. According to HTTP specifications: "The client did not produce a request within the time that the server was prepared to wait. The client MAY repeat the request without modifications at any later time."

• 410 Gone

• Indicates that the resource requested is no longer available and will not be available again.

• 416 Range Not Satisfiable

• The client has asked for a portion of the file (byte serving), but the server cannot supply that portion.

• 417 Expectation Failed

• The server cannot meet the requirements of the Expect request-header field.

• 421 Misdirected Request

• The request was directed at a server that is not able to produce a response.

• 424 Failed Dependency

• The request failed due to failure of a previous request.

• 426 Upgrade Required

• The client should switch to a different protocol such as TLS/1.0, given in the Upgrade header field.

• 429 Too Many Requests

• The user has sent too many requests in a given amount of time. Intended for use with rate-limiting schemes.