The Ultimate Guide to High Availability with MariaDB
This is a read-only copy of the MariaDB Knowledgebase generated on 2024-12-22. For the latest, interactive version please visit https://mariadb.com/kb/.

InnoDB Encryption Troubleshooting

Contents

  1. Wrong Create Options
  2. Setting Encryption Key ID For an Unencrypted Table
  3. Tablespaces Created on MySQL 5.1.47 or Earlier
  4. Spatial Indexes


Wrong Create Options

With InnoDB tables using encryption, there are several cases where a CREATE TABLE or ALTER TABLE statement can throw Error 1005, due to the InnoDB error 140, Wrong create options. For instance, 

CREATE TABLE `test`.`table1` ( `id` int(4) primary key , `name` varchar(50));
ERROR 1005 (HY000): Can't create table `test`.`table1` (errno: 140 "Wrong create options")

When this occurs, you can usually get more information about the cause of the error by following it with a SHOW WARNINGS statement.

This error is known to occur in the following cases:

SHOW WARNINGS;
+---------+------+---------------------------------------------------------------------+
| Level   | Code | Message                                                             |
+---------+------+---------------------------------------------------------------------+
| Warning |  140 | InnoDB: ENCRYPTED requires innodb_file_per_table                    |
| Error   | 1005 | Can't create table `db1`.`tab3` (errno: 140 "Wrong create options") |
| Warning | 1030 | Got error 140 "Wrong create options" from storage engine InnoDB     |
+---------+------+---------------------------------------------------------------------+
3 rows in set (0.00 sec)

SHOW WARNINGS;
+---------+------+---------------------------------------------------------------------+
| Level   | Code | Message                                                             |
+---------+------+---------------------------------------------------------------------+
| Warning |  140 | InnoDB: ENCRYPTION_KEY_ID 500 not available                         |
| Error   | 1005 | Can't create table `db1`.`tab3` (errno: 140 "Wrong create options") |
| Warning | 1030 | Got error 140 "Wrong create options" from storage engine InnoDB     |
+---------+------+---------------------------------------------------------------------+
3 rows in set (0.00 sec)

SHOW WARNINGS;
+---------+------+---------------------------------------------------------------------+
| Level   | Code | Message                                                             |
+---------+------+---------------------------------------------------------------------+
| Warning |  140 | InnoDB: innodb_encrypt_tables=OFF only allows ENCRYPTION_KEY_ID=1   |
| Error   | 1005 | Can't create table `db1`.`tab3` (errno: 140 "Wrong create options") |
| Warning | 1030 | Got error 140 "Wrong create options" from storage engine InnoDB     |
+---------+------+---------------------------------------------------------------------+
3 rows in set (0.00 sec)

Starting in MariaDB 10.1.39, MariaDB 10.2.23, and MariaDB 10.3.14, creating a table with the ENCRYPTED table option set to DEFAULT while the innodb_encrypt_tables system variable is set to OFF, and the innodb_default_encryption_key_id system variable or the ENCRYPTION_KEY_ID table option are not set to 1 will no longer fail, and it will no longer throw a warning.

For more information, see MDEV-18601.

Setting Encryption Key ID For an Unencrypted Table

If you set the ENCRYPTION_KEY_ID table option for a table that is unencrypted because the innodb_encrypt_tables system variable is set to OFF and the ENCRYPTED table option set to DEFAULT, then this encryption key ID will be saved in the table's .frm file, but the encryption key will not be saved to the table's .ibd file.

As a side effect, with the current encryption design, if the innodb_encrypt_tables system variable is later set to ON, and InnoDB goes to encrypt the table, then the InnoDB background encryption threads will not read this encryption key ID from the .frm file. Instead, the threads may encrypt the table with the encryption key with ID 1, which is internally considered the default encryption key when no key is specified. For example:

SET GLOBAL innodb_encrypt_tables=OFF;

CREATE TABLE tab1 (
   id INT PRIMARY KEY,
   str VARCHAR(50)
) ENCRYPTION_KEY_ID=100;

SET GLOBAL innodb_encrypt_tables=ON;

SELECT NAME, ENCRYPTION_SCHEME, CURRENT_KEY_ID
FROM information_schema.INNODB_TABLESPACES_ENCRYPTION
WHERE NAME='db1/tab1';
+----------+-------------------+----------------+
| NAME     | ENCRYPTION_SCHEME | CURRENT_KEY_ID |
+----------+-------------------+----------------+
| db1/tab1 |                 1 |              1 |
+----------+-------------------+----------------+

A similar problem is that, if you set the ENCRYPTION_KEY_ID table option for a table that is unencrypted because the ENCRYPTED table option is set to NO, then this encryption key ID will be saved in the table's .frm file, but the encryption key will not be saved to the table's .ibd file.

Recent versions of MariaDB will throw warnings in the case where the ENCRYPTED table option is set to NO, but they will allow the operation to succeed. For example:

CREATE TABLE tab1 (
   id INT PRIMARY KEY,
   str VARCHAR(50)
) ENCRYPTED=NO ENCRYPTION_KEY_ID=100;
Query OK, 0 rows affected, 1 warning (0.01 sec)

SHOW WARNINGS;
+---------+------+--------------------------------------------------+
| Level   | Code | Message                                          |
+---------+------+--------------------------------------------------+
| Warning |  140 | InnoDB: ENCRYPTED=NO implies ENCRYPTION_KEY_ID=1 |
+---------+------+--------------------------------------------------+
1 row in set (0.00 sec)

However, in this case, if you change the ENCRYPTED table option to YES or DEFAULT with ALTER TABLE, then it will actually use the proper key. For example:

SET GLOBAL innodb_encrypt_tables=ON;

ALTER TABLE tab1 ENCRYPTED=DEFAULT;

SELECT NAME, ENCRYPTION_SCHEME, CURRENT_KEY_ID
FROM information_schema.INNODB_TABLESPACES_ENCRYPTION
WHERE NAME = 'db1/tab1';
+----------+-------------------+----------------+
| NAME     | ENCRYPTION_SCHEME | CURRENT_KEY_ID |
+----------+-------------------+----------------+
| db1/tab1 |                 1 |            100 |
+----------+-------------------+----------------+

For more information, see MDEV-17230, MDEV-18601, and MDEV-19086.

Tablespaces Created on MySQL 5.1.47 or Earlier

MariaDB's data-at-rest encryption implementation re-used previously unused fields in InnoDB's buffer pool pages to identify the encryption key version and the post-encryption checksum. Prior to MySQL 5.1.48, these unused fields were not initialized in memory due to performance concerns. These fields still had zero values most of the time, but since they were not explicitly initialized, that means that these fields could have occasionally had non-zero values that could have been written into InnoDB's tablespace files. If MariaDB were to encounter an unencrypted page from a tablespace file that was created on an early version of MySQL that also had non-zero values in these fields, then it would mistakenly think that the page was encrypted.

The fix for MDEV-12112 that was included in MariaDB 10.1.38, MariaDB 10.2.20, and MariaDB 10.3.12 changed the way that MariaDB distinguishes between encrypted and unencrypted pages, so that it is less likely to mistake an unencrypted page for an encrypted page.

In MariaDB 10.4.3 and later, if innodb_checksum_algorithm is set to full_crc32 or strict_full_crc32, and if the table does not use ROW_FORMAT=COMPRESSED, then data files will be guaranteed to be zero-initialized.

For more information, see MDEV-18097.

Spatial Indexes

MariaDB 10.4.3 introduces support for encrypting spatial indexes. To enable, set the innodb_checksum_algorithm to full_crc32 or to strict_full_crc32. Note that MariaDB only encrypts spatial indexes when the ROW_FORMAT table option is not set to COMPRESSED.

In older versions of MariaDB, spatial index encryption is unsupported. Tables that contain spatial indexes store them unencrypted.

For more information, see MDEV-12026.

Content reproduced on this site is the property of its respective owners, and this content is not reviewed in advance by MariaDB. The views, information and opinions expressed by this content do not necessarily represent those of MariaDB or any other party.