This is a read-only copy of the MariaDB Knowledgebase generated on 2024-11-22. For the latest, interactive version please visit https://mariadb.com/kb/.

MaxScale 21.06 MaxCtrl

MaxCtrl

MaxCtrl is a command line administrative client for MaxScale which uses the MaxScale REST API for communication. It has replaced the legacy MaxAdmin command line client that is no longer supported or included.

By default, the MaxScale REST API listens on port 8989 on the local host. The default credentials for the REST API are admin:mariadb. The users used by the REST API are the same that are used by the MaxAdmin network interface. This means that any users created for the MaxAdmin network interface should work with the MaxScale REST API and MaxCtrl.

For more information about the MaxScale REST API, refer to the REST API documentation and the Configuration Guide.

Limitations

  • MaxCtrl does not work when used from a SystemD unit with MemoryDenyWriteExecute=true.

.maxctrl.cnf

If the file ~/.maxctrl.cnf exists, maxctrl will use any values in the section [maxctrl] as defaults for command line arguments. For instance, to avoid having to specify the user and password on the command line, create the file .maxctrl.cnf in your home directory, with the following content:

[maxctrl]
u = my-name
p = my-password

Note that all access rights to the file must be removed from everybody else but the owner. MaxCtrl refuses to use the file unless the rights have been removed.

Another file from which to read the defaults can be specified with the -c flag.

Commands

list

list servers

Usage: list servers

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

List all servers in MaxScale.


  Field       | Description
  -----       | -----------
  Server      | Server name
  Address     | Address where the server listens
  Port        | The port on which the server listens
  Connections | Current connection count
  State       | Server state
  GTID        | Current value of @@gtid_current_pos

list services

Usage: list services

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

List all services and the servers they use.


  Field             | Description
  -----             | -----------
  Service           | Service name
  Router            | Router used by the service
  Connections       | Current connection count
  Total Connections | Total connection count
  Targets           | Targets that the service uses

list listeners

Usage: list listeners [service]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

List listeners of all services. If a service is given, only listeners for that service are listed.


  Field   | Description
  -----   | -----------
  Name    | Listener name
  Port    | The port where the listener listens
  Host    | The address or socket where the listener listens
  State   | Listener state
  Service | Service that this listener points to

list monitors

Usage: list monitors

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

List all monitors in MaxScale.


  Field   | Description
  -----   | -----------
  Monitor | Monitor name
  State   | Monitor state
  Servers | The servers that this monitor monitors

list sessions

Usage: list sessions

Options:
      --rdns     Perform a reverse DNS lookup on client IPs  [boolean] [default: false]
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

List all client sessions.


  Field     | Description
  -----     | -----------
  Id        | Session ID
  User      | Username
  Host      | Client host address
  Connected | Time when the session started
  Idle      | How long the session has been idle, in seconds
  Service   | The service where the session connected

list filters

Usage: list filters

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

List all filters in MaxScale.


  Field   | Description
  -----   | -----------
  Filter  | Filter name
  Service | Services that use the filter
  Module  | The module that the filter uses

list modules

Usage: list modules

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

List all currently loaded modules.


  Field   | Description
  -----   | -----------
  Module  | Module name
  Type    | Module type
  Version | Module version

list threads

Usage: list threads

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

List all worker threads.


  Field       | Description
  -----       | -----------
  Id          | Thread ID
  Current FDs | Current number of managed file descriptors
  Total FDs   | Total number of managed file descriptors
  Load (1s)   | Load percentage over the last second
  Load (1m)   | Load percentage over the last minute
  Load (1h)   | Load percentage over the last hour

list users

Usage: list users

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

List network the users that can be used to connect to the MaxScale REST API.


  Field      | Description
  -----      | -----------
  Name       | User name
  Type       | User type
  Privileges | User privileges

list commands

Usage: list commands

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

List all available module commands.


  Field    | Description
  -----    | -----------
  Module   | Module name
  Commands | Available commands

list queries

Usage: list queries

List queries options:
  -l, --max-length  Maximum SQL length to display. Use --max-length=0 for no limit.  [number] [default: 120]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

List all active queries being executed through MaxScale. In order for this command to work, MaxScale must be configured with 'retain_last_statements' set to a value greater than 0.

show

show server

Usage: show server <server>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Show detailed information about a server. The `Parameters` field contains the currently configured parameters for this server. See `--help alter server` for more details about altering server parameters.


  Field               | Description
  -----               | -----------
  Server              | Server name
  Address             | Address where the server listens
  Port                | The port on which the server listens
  State               | Server state
  Version             | Server version
  Last Event          | The type of the latest event
  Triggered At        | Time when the latest event was triggered at
  Services            | Services that use this server
  Monitors            | Monitors that monitor this server
  Master ID           | The server ID of the master
  Node ID             | The node ID of this server
  Slave Server IDs    | List of slave server IDs
  Current Connections | Current connection count
  Total Connections   | Total cumulative connection count
  Max Connections     | Maximum number of concurrent connections ever seen
  Statistics          | Server statistics
  Parameters          | Server parameters

show servers

Usage: show servers

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Show detailed information about all servers.


  Field               | Description
  -----               | -----------
  Server              | Server name
  Address             | Address where the server listens
  Port                | The port on which the server listens
  State               | Server state
  Version             | Server version
  Last Event          | The type of the latest event
  Triggered At        | Time when the latest event was triggered at
  Services            | Services that use this server
  Monitors            | Monitors that monitor this server
  Master ID           | The server ID of the master
  Node ID             | The node ID of this server
  Slave Server IDs    | List of slave server IDs
  Current Connections | Current connection count
  Total Connections   | Total cumulative connection count
  Max Connections     | Maximum number of concurrent connections ever seen
  Statistics          | Server statistics
  Parameters          | Server parameters

show service

Usage: show service <service>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Show detailed information about a service. The `Parameters` field contains the currently configured parameters for this service. See `--help alter service` for more details about altering service parameters.


  Field               | Description
  -----               | -----------
  Service             | Service name
  Router              | Router that the service uses
  State               | Service state
  Started At          | When the service was started
  Current Connections | Current connection count
  Total Connections   | Total connection count
  Max Connections     | Historical maximum connection count
  Cluster             | The cluster that the service uses
  Servers             | Servers that the service uses
  Services            | Services that the service uses
  Filters             | Filters that the service uses
  Parameters          | Service parameter
  Router Diagnostics  | Diagnostics provided by the router module

show services

Usage: show services

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Show detailed information about all services.


  Field               | Description
  -----               | -----------
  Service             | Service name
  Router              | Router that the service uses
  State               | Service state
  Started At          | When the service was started
  Current Connections | Current connection count
  Total Connections   | Total connection count
  Max Connections     | Historical maximum connection count
  Cluster             | The cluster that the service uses
  Servers             | Servers that the service uses
  Services            | Services that the service uses
  Filters             | Filters that the service uses
  Parameters          | Service parameter
  Router Diagnostics  | Diagnostics provided by the router module

show monitor

Usage: show monitor <monitor>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Show detailed information about a monitor. The `Parameters` field contains the currently configured parameters for this monitor. See `--help alter monitor` for more details about altering monitor parameters.


  Field               | Description
  -----               | -----------
  Monitor             | Monitor name
  Module              | Monitor module
  State               | Monitor state
  Servers             | The servers that this monitor monitors
  Parameters          | Monitor parameters
  Monitor Diagnostics | Diagnostics provided by the monitor module

show monitors

Usage: show monitors

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Show detailed information about all monitors.


  Field               | Description
  -----               | -----------
  Monitor             | Monitor name
  Module              | Monitor module
  State               | Monitor state
  Servers             | The servers that this monitor monitors
  Parameters          | Monitor parameters
  Monitor Diagnostics | Diagnostics provided by the monitor module

show session

Usage: show session <session>

Options:
      --rdns     Perform a reverse DNS lookup on client IPs  [boolean] [default: false]
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Show detailed information about a single session. The list of sessions can be retrieved with the `list sessions` command. The <session> is the session ID of a particular session.

The `Connections` field lists the servers to which the session is connected and the `Connection IDs` field lists the IDs for those connections.


  Field             | Description
  -----             | -----------
  Id                | Session ID
  Service           | The service where the session connected
  State             | Session state
  User              | Username
  Host              | Client host address
  Database          | Current default database of the connection
  Connected         | Time when the session started
  Idle              | How long the session has been idle, in seconds
  Parameters        | Session parameters
  Client TLS Cipher | Client TLS cipher
  Connections       | Ordered list of backend connections
  Connection IDs    | Thread IDs for the backend connections
  Queries           | Query history
  Log               | Per-session log messages

show sessions

Usage: show sessions

Options:
      --rdns     Perform a reverse DNS lookup on client IPs  [boolean] [default: false]
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Show detailed information about all sessions. See `--help show session` for more details.


  Field             | Description
  -----             | -----------
  Id                | Session ID
  Service           | The service where the session connected
  State             | Session state
  User              | Username
  Host              | Client host address
  Database          | Current default database of the connection
  Connected         | Time when the session started
  Idle              | How long the session has been idle, in seconds
  Parameters        | Session parameters
  Client TLS Cipher | Client TLS cipher
  Connections       | Ordered list of backend connections
  Connection IDs    | Thread IDs for the backend connections
  Queries           | Query history
  Log               | Per-session log messages

show filter

Usage: show filter <filter>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

The list of services that use this filter is show in the `Services` field.


  Field       | Description
  -----       | -----------
  Filter      | Filter name
  Module      | The module that the filter uses
  Services    | Services that use the filter
  Parameters  | Filter parameters
  Diagnostics | Filter diagnostics

show filters

Usage: show filters

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Show detailed information of all filters.


  Field       | Description
  -----       | -----------
  Filter      | Filter name
  Module      | The module that the filter uses
  Services    | Services that use the filter
  Parameters  | Filter parameters
  Diagnostics | Filter diagnostics

show listener

Usage: show listener <listener>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]




                                                           Field      | Description
                                                           -----      | -----------
                                                           Name       | Listener name
                                                           Service    | Services that the listener points to
                                                           Parameters | Listener parameters

show listeners

Usage: show filters

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Show detailed information of all filters.


  Field       | Description
  -----       | -----------
  Filter      | Filter name
  Module      | The module that the filter uses
  Services    | Services that use the filter
  Parameters  | Filter parameters
  Diagnostics | Filter diagnostics

show module

Usage: show module <module>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

This command shows all available parameters as well as detailed version information of a loaded module.


  Field       | Description
  -----       | -----------
  Module      | Module name
  Type        | Module type
  Version     | Module version
  Maturity    | Module maturity
  Description | Short description about the module
  Parameters  | All the parameters that the module accepts
  Commands    | Commands that the module provides

show modules

Usage: show modules

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Displays detailed information about all modules.


  Field       | Description
  -----       | -----------
  Module      | Module name
  Type        | Module type
  Version     | Module version
  Maturity    | Module maturity
  Description | Short description about the module
  Parameters  | All the parameters that the module accepts
  Commands    | Commands that the module provides

show maxscale

Usage: show maxscale

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

See `--help alter maxscale` for more details about altering MaxScale parameters.


  Field        | Description
  -----        | -----------
  Version      | MaxScale version
  Commit       | MaxScale commit ID
  Started At   | Time when MaxScale was started
  Activated At | Time when MaxScale left passive mode
  Uptime       | Time MaxScale has been running
  Config Sync  | MaxScale configuration synchronization
  Parameters   | Global MaxScale parameters

show thread

Usage: show thread <thread>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Show detailed information about a worker thread.


  Field                  | Description
  -----                  | -----------
  Id                     | Thread ID
  Accepts                | Number of TCP accepts done by this thread
  Reads                  | Number of EPOLLIN events
  Writes                 | Number of EPOLLOUT events
  Hangups                | Number of EPOLLHUP and EPOLLRDUP events
  Errors                 | Number of EPOLLERR events
  Avg event queue length | Average number of events returned by one epoll_wait call
  Max event queue length | Maximum number of events returned by one epoll_wait call
  Max exec time          | The longest time spent processing events returned by a epoll_wait call
  Max queue time         | The longest time an event had to wait before it was processed
  Current FDs            | Current number of managed file descriptors
  Total FDs              | Total number of managed file descriptors
  Load (1s)              | Load percentage over the last second
  Load (1m)              | Load percentage over the last minute
  Load (1h)              | Load percentage over the last hour
  QC cache size          | Query classifier size
  QC cache inserts       | Number of times a new query was added into the query classification cache
  QC cache hits          | How many times a query classification was found in the query classification cache
  QC cache misses        | How many times a query classification was not found in the query classification cache
  QC cache evictions     | How many times a query classification result was evicted from the query classification cache

show threads

Usage: show threads

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Show detailed information about all worker threads.


  Field                  | Description
  -----                  | -----------
  Id                     | Thread ID
  Accepts                | Number of TCP accepts done by this thread
  Reads                  | Number of EPOLLIN events
  Writes                 | Number of EPOLLOUT events
  Hangups                | Number of EPOLLHUP and EPOLLRDUP events
  Errors                 | Number of EPOLLERR events
  Avg event queue length | Average number of events returned by one epoll_wait call
  Max event queue length | Maximum number of events returned by one epoll_wait call
  Max exec time          | The longest time spent processing events returned by a epoll_wait call
  Max queue time         | The longest time an event had to wait before it was processed
  Current FDs            | Current number of managed file descriptors
  Total FDs              | Total number of managed file descriptors
  Load (1s)              | Load percentage over the last second
  Load (1m)              | Load percentage over the last minute
  Load (1h)              | Load percentage over the last hour
  QC cache size          | Query classifier size
  QC cache inserts       | Number of times a new query was added into the query classification cache
  QC cache hits          | How many times a query classification was found in the query classification cache
  QC cache misses        | How many times a query classification was not found in the query classification cache
  QC cache evictions     | How many times a query classification result was evicted from the query classification cache

show logging

Usage: show logging

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

See `--help alter logging` for more details about altering logging parameters.


  Field              | Description
  -----              | -----------
  Current Log File   | The current log file MaxScale is logging into
  Enabled Log Levels | List of log levels enabled in MaxScale
  Parameters         | Logging parameters

show commands

Usage: show commands <module>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

This command shows the parameters the command expects with the parameter descriptions.


  Field        | Description
  -----        | -----------
  Command      | Command name
  Parameters   | Parameters the command supports
  Descriptions | Parameter descriptions

show qc_cache

Usage: show qc_cache

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Show contents (statement and hits) of query classifier cache.

show dbusers

Usage: show dbusers <service>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Show information about the database users of the service.


  Field  | Description
  -----  | -----------
  User   | The user name of the account
  Host   | The host of the account
  Plugin | Authentication plugin
  TLS    | Whether TLS is required from this user
  Super  | Does the user have a SUPER grant
  Global | Does the user have global database access
  Proxy  | Whether this is a proxy user
  Role   | The default role for this user

set

set server

Usage: set server <server> <state>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Set options:
      --force  If combined with the `maintenance` state, this forcefully closes all connections to the target server  [boolean] [default: false]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

If <server> is monitored by a monitor, this command should only be used to set the server into the `maintenance` or the `drain` state. Any other states will be overridden by the monitor on the next monitoring interval. To manually control server states, use the `stop monitor <name>` command to stop the monitor before setting the server states manually.

When a server is set into the `drain` state, no new connections to it are allowed but existing connections are allowed to gracefully close. Servers with the `Master` status cannot be drained or set into maintenance mode. To clear a state set by this command, use the `clear server` command.

To forcefully close all connections to a server, use `set server <name> maintenance --force`

clear

clear server

Usage: clear server <server> <state>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

This command clears a server state set by the `set server <server> <state>` command

drain

drain server

Usage: drain server <server>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Drain options:
      --drain-timeout  Timeout for the drain operation in seconds. If exceeded, the server is added back to all services without putting it into maintenance mode.  [number] [default: 90]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

This command drains the server of connections by first removing it from all services after which it waits until all connections are closed. When all connections are closed, the server is put into the `maintenance` state and added back to all the services where it was removed from. To take the server back into use, execute `clear server <server> maintenance`.

Warning: This command is not safe to interrupt. If interrupted, the servers might not be added back to the service. For a better alternative, use `set server <server> drain`. This command has been deprecated in MaxScale 6.0.

enable

enable log-priority

Usage: enable log-priority <log>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

The `debug` log priority is only available for debug builds of MaxScale.

disable

disable log-priority

Usage: disable log-priority <log>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

The `debug` log priority is only available for debug builds of MaxScale.

create

create server

Usage: create server <name> <host|socket> [port] [params...]

Create server options:
      --services                     Link the created server to these services  [array]
      --monitors                     Link the created server to these monitors  [array]
      --protocol                     Protocol module name  [string] [default: "mariadbbackend"]
      --authenticator                Authenticator module name (deprecated)  [string]
      --authenticator-options        Option string for the authenticator (deprecated)  [string]
      --tls                          Enable TLS  [boolean]
      --tls-key                      Path to TLS key  [string]
      --tls-cert                     Path to TLS certificate  [string]
      --tls-ca-cert                  Path to TLS CA certificate  [string]
      --tls-version                  TLS version to use  [string]
      --tls-cert-verify-depth        TLS certificate verification depth  [number]
      --tls-verify-peer-certificate  Enable TLS peer certificate verification  [boolean]
      --tls-verify-peer-host         Enable TLS peer host verification  [boolean]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

The created server will not be used by any services or monitors unless the --services or --monitors options are given. The list of servers a service or a monitor uses can be altered with the `link` and `unlink` commands. If the <host|socket> argument is an absolute path, the server will use a local UNIX domain socket connection. In this case the [port] argument is ignored.

The recommended way of declaring parameters is with the new `key=value` syntax added in MaxScale 6.2.0. Note that for some parameters (e.g. `extra_port` and `proxy_protocol`) this is the only way to pass them.

create monitor

Usage: create monitor <name> <module> [params...]

Create monitor options:
      --servers           Link the created monitor to these servers. All non-option arguments after --servers are interpreted as server names e.g. `--servers srv1 srv2 srv3`.  [array]
      --monitor-user      Username for the monitor user  [string]
      --monitor-password  Password for the monitor user  [string]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

The list of servers given with the --servers option should not contain any servers that are already monitored by another monitor. The last argument to this command is a list of key=value parameters given as the monitor parameters.

create service

Usage: service <name> <router> <params...>

Create service options:
      --servers   Link the created service to these servers. All non-option arguments after --servers are interpreted as server names e.g. `--servers srv1 srv2 srv3`.  [array]
      --filters   Link the created service to these filters. All non-option arguments after --filters are interpreted as filter names e.g. `--filters f1 f2 f3`.  [array]
      --services  Link the created service to these services. All non-option arguments after --services are interpreted as service names e.g. `--services svc1 svc2 svc3`.  [array]
      --cluster   Link the created service to this cluster (i.e. a monitor)  [string]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

The last argument to this command is a list of key=value parameters given as the service parameters. If the --servers, --services or --filters options are used, they must be defined after the service parameters. The --cluster option is mutually exclusive with the --servers and --services options.

Note that the `user` and `password` parameters must be defined.

create filter

Usage: filter <name> <module> [params...]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

The last argument to this command is a list of key=value parameters given as the filter parameters.

create listener

Usage: create listener <service> <name> <port> [params...]

Create listener options:
      --interface                    Interface to listen on  [string] [default: "::"]
      --protocol                     Protocol module name  [string] [default: "mariadbclient"]
      --authenticator                Authenticator module name  [string]
      --authenticator-options        Option string for the authenticator  [string]
      --tls-key                      Path to TLS key  [string]
      --tls-cert                     Path to TLS certificate  [string]
      --tls-ca-cert                  Path to TLS CA certificate  [string]
      --tls-version                  TLS version to use  [string]
      --tls-crl                      TLS CRL to use  [string]
      --tls-cert-verify-depth        TLS certificate verification depth  [number]
      --tls-verify-peer-certificate  Enable TLS peer certificate verification  [boolean]
      --tls-verify-peer-host         Enable TLS peer host verification  [boolean]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

The new listener will be taken into use immediately. The last argument to this command is a list of key=value parameters given as the listener parameters. These parameters override any parameters set via command line options: e.g. using `protocol=mariadb` will override the `--protocol=cdc` option.

create user

Usage: create user <name> <password>

Create user options:
      --type  Type of user to create  [string] [choices: "admin", "basic"] [default: "basic"]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

By default the created user will have read-only privileges. To make the user an administrative user, use the `--type=admin` option. Basic users can only perform `list` and `show` commands.

create report

Usage: create report <file>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

The generated report contains the state of all the objects in MaxScale as well as all other required information needed to diagnose problems.

destroy

destroy server

Usage: destroy server <name>

Destroy options:
      --force  Remove the server from monitors and services before destroying it  [boolean] [default: false]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

The server must be unlinked from all services and monitor before it can be destroyed.

destroy monitor

Usage: destroy monitor <name>

Destroy options:
      --force  Remove monitored servers from the monitor before destroying it  [boolean] [default: false]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

The monitor must be unlinked from all servers before it can be destroyed.

destroy listener

Usage: destroy listener { <listener> | <service> <listener> }

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Destroying a listener closes the listening socket, opening it up for immediate reuse. If only one argument is given and it is the name of a listener, it is unconditionally destroyed. If two arguments are given and they are a service and a listener, the listener is only destroyed if it is for the given service.

destroy service

Usage: destroy service <name>

Destroy options:
      --force  Remove filters, listeners and servers from service before destroying it  [boolean] [default: false]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

The service must be unlinked from all servers and filters. All listeners for the service must be destroyed before the service itself can be destroyed.

destroy filter

Usage: destroy filter <name>

Destroy options:
      --force  Automatically remove the filter from all services before destroying it  [boolean] [default: false]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

The filter must not be used by any service when it is destroyed.

destroy user

Usage: destroy user <name>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

The last remaining administrative user cannot be removed. Create a replacement administrative user before attempting to remove the last administrative user.
Usage: link service <name> <target...>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

This command links targets to a service, making them available for any connections that use the service. A target can be a server, another service or a cluster (i.e. a monitor). Before a server is linked to a service, it should be linked to a monitor so that the server state is up to date. Newly linked targets are only available to new connections, existing connections will use the old list of targets. If a monitor (a cluster of servers) is linked to a service, the service must not have any other targets linked to it.
Usage: link monitor <name> <server...>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Linking a server to a monitor will add it to the list of servers that are monitored by that monitor. A server can be monitored by only one monitor at a time.
Usage: unlink service <name> <target...>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

This command unlinks targets from a service, removing them from the list of available targets for that service. New connections to the service will not use the unlinked targets but existing connections can still use the targets. A target can be a server, another service or a cluster (a monitor).
Usage: unlink monitor <name> <server...>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

This command unlinks servers from a monitor, removing them from the list of monitored servers. The servers will be left in their current state when they are unlinked from a monitor.

start

start service

Usage: start service <name>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

This starts a service stopped by `stop service <name>`

start listener

Usage: start listener <name>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

This starts a listener stopped by `stop listener <name>`

start monitor

Usage: start monitor <name>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

This starts a monitor stopped by `stop monitor <name>`

start services

Usage: start [services|maxscale]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

This command will execute the `start service` command for all services in MaxScale.

stop

stop service

Usage: stop service <name>

Stop options:
      --force  Close existing connections after stopping the service  [boolean] [default: false]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Stopping a service will prevent all the listeners for that service from accepting new connections. Existing connections will still be handled normally until they are closed.

stop listener

Usage: stop listener <name>

Stop options:
      --force  Close existing connections after stopping the listener  [boolean] [default: false]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Stopping a listener will prevent it from accepting new connections. Existing connections will still be handled normally until they are closed.

stop monitor

Usage: stop monitor <name>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Stopping a monitor will pause the monitoring of the servers. This can be used to manually control server states with the `set server` command.

stop services

Usage: stop [services|maxscale]

Stop options:
      --force  Close existing connections after stopping all services  [boolean] [default: false]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

This command will execute the `stop service` command for all services in MaxScale.

alter

alter server

Usage: alter server <server> <key=value> ...

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

To display the server parameters, execute `show server <server>`.
The parameters should be given in the `key=value` format. This command also supports the legacy method
of passing parameters as `key value` pairs but the use of this is not recommended.

alter monitor

Usage: alter monitor <monitor> <key=value> ...

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

To display the monitor parameters, execute `show monitor <monitor>`
The parameters should be given in the `key=value` format. This command also supports the legacy method
of passing parameters as `key value` pairs but the use of this is not recommended.

alter service

Usage: alter service <service> <key=value> ...

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

To display the service parameters, execute `show service <service>`. Some routers support runtime configuration changes to all parameters. Currently all readconnroute, readwritesplit and schemarouter parameters can be changed at runtime. In addition to module specific parameters, the following list of common service parameters can be altered at runtime:

[
    "user",
    "passwd",
    "enable_root_user",
    "max_connections",
    "connection_timeout",
    "auth_all_servers",
    "optimize_wildcard",
    "strip_db_esc",
    "max_slave_connections",
    "max_slave_replication_lag",
    "retain_last_statements"
]
The parameters should be given in the `key=value` format. This command also supports the legacy method
of passing parameters as `key value` pairs but the use of this is not recommended.

alter service-filters

Usage: alter service-filters <service> [filters...]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

The order of the filters given as the second parameter will also be the order in which queries pass through the filter chain. If no filters are given, all existing filters are removed from the service.

For example, the command `maxctrl alter service filters my-service A B C` will set the filter chain for the service `my-service` so that A gets the query first after which it is passed to B and finally to C. This behavior is the same as if the `filters=A|B|C` parameter was defined for the service.

The parameters should be given in the `key=value` format. This command also supports the legacy method
of passing parameters as `key value` pairs but the use of this is not recommended.

alter filter

Usage: alter filter <filter> <key=value> ...

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

To display the filter parameters, execute `show filter <filter>`. Some filters support runtime configuration changes to all parameters. Refer to the filter documentation for details on whether it supports runtime configuration changes and which parameters can be altered.

The parameters should be given in the `key=value` format. This command also supports the legacy method
of passing parameters as `key value` pairs but the use of this is not recommended.
Note: To pass options with dashes in them, surround them in both single and double quotes:

      maxctrl alter filter my-namedserverfilter target01 '"->master"'

alter listener

Usage: alter listener <listener> <key=value> ...

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

To display the listener parameters, execute `show listener <listener>`
The parameters should be given in the `key=value` format. This command also supports the legacy method
of passing parameters as `key value` pairs but the use of this is not recommended.

alter logging

Usage: alter logging <key=value> ...

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

To display the logging parameters, execute `show logging`
The parameters should be given in the `key=value` format. This command also supports the legacy method
of passing parameters as `key value` pairs but the use of this is not recommended.

alter maxscale

Usage: alter maxscale <key=value> ...

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

To display the MaxScale parameters, execute `show maxscale`. The following list of parameters can be altered at runtime:

[
    "auth_connect_timeout",
    "auth_read_timeout",
    "auth_write_timeout",
    "admin_auth",
    "admin_log_auth_failures",
    "passive",
    "ms_timestamp",
    "skip_permission_checks",
    "query_retries",
    "query_retry_timeout",
    "retain_last_statements",
    "dump_last_statements"
]
The parameters should be given in the `key=value` format. This command also supports the legacy method
of passing parameters as `key value` pairs but the use of this is not recommended.

alter user

Usage: alter user <name> <password>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Changes the password for a user. To change the user type, destroy the user and then create it again.

alter session

Usage: alter session <session> <key=value> ...

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Alter parameters of a session. To get the list of modifiable parameters, use `show session <session>`
The parameters should be given in the `key=value` format. This command also supports the legacy method
of passing parameters as `key value` pairs but the use of this is not recommended.

alter session-filters

Usage: alter session-filters <session> [filters...]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

The order of the filters given as the second parameter will also be the order in which queries pass through the filter chain. If no filters are given, all existing filters are removed from the session. The syntax is similar to `alter service-filters`.

rotate

rotate logs

Usage: rotate logs

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

This command is intended to be used with the `logrotate` command.

reload

reload service

Usage: reload service <service>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

call

call command

Usage: call command <module> <command> [params...]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

To inspect the list of module commands, execute `list commands`

cluster

cluster diff

Usage: cluster diff <target>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

The list of host servers is controlled with the --hosts option. The target server should not be in the host list. Value of <target> must be in HOST:PORT format

cluster sync

Usage: cluster sync <target>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

This command will alter all MaxScale instances given in the --hosts option to represent the <target> MaxScale. Value of <target> must be in HOST:PORT format. Synchronization can be attempted again if a previous attempt failed due to a network failure or some other ephemeral error. Any other errors require manual synchronization of the MaxScale configuration files and a restart of the failed Maxscale.

Note: New objects created by `cluster sync` will have a placeholder value and must be manually updated. Passwords for existing objects will not be updated by `cluster sync` and must also be manually updated.

api

api get

Usage: get <resource> [path]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

API options:
      --sum     Calculate sum of API result. Only works for arrays of numbers e.g. `api get --sum servers data[].attributes.statistics.connections`.  [boolean] [default: false]
      --pretty  Pretty-print output.  [boolean] [default: false]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Perform a raw REST API call. The path definition uses JavaScript syntax to extract values. For example, the following command extracts all server states as an array of JSON values: maxctrl api get servers data[].attributes.state

api post

Usage: post <resource> <value>

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

API options:
      --sum     Calculate sum of API result. Only works for arrays of numbers e.g. `api get --sum servers data[].attributes.statistics.connections`.  [boolean] [default: false]
      --pretty  Pretty-print output.  [boolean] [default: false]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Perform a raw REST API call. The provided value is passed as-is to the REST API after building it with JSON.parse

api patch

Usage: patch <resource> [path]

Global Options:
  -c, --config     MaxCtrl configuration file  [string] [default: "~/.maxctrl.cnf"]
  -u, --user       Username to use  [string] [default: "admin"]
  -p, --password   Password for the user. To input the password manually, use -p '' or --password=''  [string] [default: "mariadb"]
  -h, --hosts      List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma.  [string] [default: "127.0.0.1:8989"]
  -t, --timeout    Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s'  [string] [default: "10000"]
  -q, --quiet      Silence all output. Ignored while in interactive mode.  [boolean] [default: false]
      --tsv        Print tab separated output  [boolean] [default: false]
      --skip-sync  Disable configuration synchronization for this command  [boolean] [default: false]

HTTPS/TLS Options:
  -s, --secure                  Enable HTTPS requests  [boolean] [default: false]
      --tls-key                 Path to TLS private key  [string]
      --tls-passphrase          Password for the TLS private key  [string]
      --tls-cert                Path to TLS public certificate  [string]
      --tls-ca-cert             Path to TLS CA certificate  [string]
  -n, --tls-verify-server-cert  Whether to verify server TLS certificates  [boolean] [default: true]

API options:
      --sum     Calculate sum of API result. Only works for arrays of numbers e.g. `api get --sum servers data[].attributes.statistics.connections`.  [boolean] [default: false]
      --pretty  Pretty-print output.  [boolean] [default: false]

Options:
      --version  Show version number  [boolean]
      --help     Show help  [boolean]

Perform a raw REST API call. The provided value is passed as-is to the REST API after building it with JSON.parse

classify

Content reproduced on this site is the property of its respective owners, and this content is not reviewed in advance by MariaDB. The views, information and opinions expressed by this content do not necessarily represent those of MariaDB or any other party.