MaxScale 21.06 MaxCtrl
MaxCtrl
MaxCtrl is a command line administrative client for MaxScale which uses the MaxScale REST API for communication. It has replaced the legacy MaxAdmin command line client that is no longer supported or included.
By default, the MaxScale REST API listens on port 8989 on the local host. The
default credentials for the REST API are admin:mariadb. The users used by the
REST API are the same that are used by the MaxAdmin network interface. This
means that any users created for the MaxAdmin network interface should work with
the MaxScale REST API and MaxCtrl.
For more information about the MaxScale REST API, refer to the REST API documentation and the Configuration Guide.
Limitations
- MaxCtrl does not work when used from a SystemD unit with MemoryDenyWriteExecute=true.
.maxctrl.cnf
If the file ~/.maxctrl.cnf exists, maxctrl will use any values in the
section [maxctrl] as defaults for command line arguments. For instance,
to avoid having to specify the user and password on the command line,
create the file .maxctrl.cnf in your home directory, with the following
content:
[maxctrl] u = my-name p = my-password
Note that all access rights to the file must be removed from everybody else but the owner. MaxCtrl refuses to use the file unless the rights have been removed.
Another file from which to read the defaults can be specified with the -c
flag.
Commands
list
list servers
Usage: list servers
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
List all servers in MaxScale.
Field | Description
----- | -----------
Server | Server name
Address | Address where the server listens
Port | The port on which the server listens
Connections | Current connection count
State | Server state
GTID | Current value of @@gtid_current_pos
list services
Usage: list services
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
List all services and the servers they use.
Field | Description
----- | -----------
Service | Service name
Router | Router used by the service
Connections | Current connection count
Total Connections | Total connection count
Targets | Targets that the service uses
list listeners
Usage: list listeners [service]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
List listeners of all services. If a service is given, only listeners for that service are listed.
Field | Description
----- | -----------
Name | Listener name
Port | The port where the listener listens
Host | The address or socket where the listener listens
State | Listener state
Service | Service that this listener points to
list monitors
Usage: list monitors
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
List all monitors in MaxScale.
Field | Description
----- | -----------
Monitor | Monitor name
State | Monitor state
Servers | The servers that this monitor monitors
list sessions
Usage: list sessions
Options:
--rdns Perform a reverse DNS lookup on client IPs [boolean] [default: false]
--version Show version number [boolean]
--help Show help [boolean]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
List all client sessions.
Field | Description
----- | -----------
Id | Session ID
User | Username
Host | Client host address
Connected | Time when the session started
Idle | How long the session has been idle, in seconds
Service | The service where the session connected
list filters
Usage: list filters
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
List all filters in MaxScale.
Field | Description
----- | -----------
Filter | Filter name
Service | Services that use the filter
Module | The module that the filter uses
list modules
Usage: list modules
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
List all currently loaded modules.
Field | Description
----- | -----------
Module | Module name
Type | Module type
Version | Module version
list threads
Usage: list threads
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
List all worker threads.
Field | Description
----- | -----------
Id | Thread ID
Current FDs | Current number of managed file descriptors
Total FDs | Total number of managed file descriptors
Load (1s) | Load percentage over the last second
Load (1m) | Load percentage over the last minute
Load (1h) | Load percentage over the last hour
list users
Usage: list users
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
List network the users that can be used to connect to the MaxScale REST API.
Field | Description
----- | -----------
Name | User name
Type | User type
Privileges | User privileges
list commands
Usage: list commands
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
List all available module commands.
Field | Description
----- | -----------
Module | Module name
Commands | Available commands
list queries
Usage: list queries
List queries options:
-l, --max-length Maximum SQL length to display. Use --max-length=0 for no limit. [number] [default: 120]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
List all active queries being executed through MaxScale. In order for this command to work, MaxScale must be configured with 'retain_last_statements' set to a value greater than 0.
show
show server
Usage: show server <server>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Show detailed information about a server. The `Parameters` field contains the currently configured parameters for this server. See `--help alter server` for more details about altering server parameters.
Field | Description
----- | -----------
Server | Server name
Address | Address where the server listens
Port | The port on which the server listens
State | Server state
Version | Server version
Last Event | The type of the latest event
Triggered At | Time when the latest event was triggered at
Services | Services that use this server
Monitors | Monitors that monitor this server
Master ID | The server ID of the master
Node ID | The node ID of this server
Slave Server IDs | List of slave server IDs
Current Connections | Current connection count
Total Connections | Total cumulative connection count
Max Connections | Maximum number of concurrent connections ever seen
Statistics | Server statistics
Parameters | Server parameters
show servers
Usage: show servers
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Show detailed information about all servers.
Field | Description
----- | -----------
Server | Server name
Address | Address where the server listens
Port | The port on which the server listens
State | Server state
Version | Server version
Last Event | The type of the latest event
Triggered At | Time when the latest event was triggered at
Services | Services that use this server
Monitors | Monitors that monitor this server
Master ID | The server ID of the master
Node ID | The node ID of this server
Slave Server IDs | List of slave server IDs
Current Connections | Current connection count
Total Connections | Total cumulative connection count
Max Connections | Maximum number of concurrent connections ever seen
Statistics | Server statistics
Parameters | Server parameters
show service
Usage: show service <service>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Show detailed information about a service. The `Parameters` field contains the currently configured parameters for this service. See `--help alter service` for more details about altering service parameters.
Field | Description
----- | -----------
Service | Service name
Router | Router that the service uses
State | Service state
Started At | When the service was started
Current Connections | Current connection count
Total Connections | Total connection count
Max Connections | Historical maximum connection count
Cluster | The cluster that the service uses
Servers | Servers that the service uses
Services | Services that the service uses
Filters | Filters that the service uses
Parameters | Service parameter
Router Diagnostics | Diagnostics provided by the router module
show services
Usage: show services
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Show detailed information about all services.
Field | Description
----- | -----------
Service | Service name
Router | Router that the service uses
State | Service state
Started At | When the service was started
Current Connections | Current connection count
Total Connections | Total connection count
Max Connections | Historical maximum connection count
Cluster | The cluster that the service uses
Servers | Servers that the service uses
Services | Services that the service uses
Filters | Filters that the service uses
Parameters | Service parameter
Router Diagnostics | Diagnostics provided by the router module
show monitor
Usage: show monitor <monitor>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Show detailed information about a monitor. The `Parameters` field contains the currently configured parameters for this monitor. See `--help alter monitor` for more details about altering monitor parameters.
Field | Description
----- | -----------
Monitor | Monitor name
Module | Monitor module
State | Monitor state
Servers | The servers that this monitor monitors
Parameters | Monitor parameters
Monitor Diagnostics | Diagnostics provided by the monitor module
show monitors
Usage: show monitors
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Show detailed information about all monitors.
Field | Description
----- | -----------
Monitor | Monitor name
Module | Monitor module
State | Monitor state
Servers | The servers that this monitor monitors
Parameters | Monitor parameters
Monitor Diagnostics | Diagnostics provided by the monitor module
show session
Usage: show session <session>
Options:
--rdns Perform a reverse DNS lookup on client IPs [boolean] [default: false]
--version Show version number [boolean]
--help Show help [boolean]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Show detailed information about a single session. The list of sessions can be retrieved with the `list sessions` command. The <session> is the session ID of a particular session.
The `Connections` field lists the servers to which the session is connected and the `Connection IDs` field lists the IDs for those connections.
Field | Description
----- | -----------
Id | Session ID
Service | The service where the session connected
State | Session state
User | Username
Host | Client host address
Database | Current default database of the connection
Connected | Time when the session started
Idle | How long the session has been idle, in seconds
Parameters | Session parameters
Client TLS Cipher | Client TLS cipher
Connections | Ordered list of backend connections
Connection IDs | Thread IDs for the backend connections
Queries | Query history
Log | Per-session log messages
show sessions
Usage: show sessions
Options:
--rdns Perform a reverse DNS lookup on client IPs [boolean] [default: false]
--version Show version number [boolean]
--help Show help [boolean]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Show detailed information about all sessions. See `--help show session` for more details.
Field | Description
----- | -----------
Id | Session ID
Service | The service where the session connected
State | Session state
User | Username
Host | Client host address
Database | Current default database of the connection
Connected | Time when the session started
Idle | How long the session has been idle, in seconds
Parameters | Session parameters
Client TLS Cipher | Client TLS cipher
Connections | Ordered list of backend connections
Connection IDs | Thread IDs for the backend connections
Queries | Query history
Log | Per-session log messages
show filter
Usage: show filter <filter>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
The list of services that use this filter is show in the `Services` field.
Field | Description
----- | -----------
Filter | Filter name
Module | The module that the filter uses
Services | Services that use the filter
Parameters | Filter parameters
Diagnostics | Filter diagnostics
show filters
Usage: show filters
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Show detailed information of all filters.
Field | Description
----- | -----------
Filter | Filter name
Module | The module that the filter uses
Services | Services that use the filter
Parameters | Filter parameters
Diagnostics | Filter diagnostics
show listener
Usage: show listener <listener>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Field | Description
----- | -----------
Name | Listener name
Service | Services that the listener points to
Parameters | Listener parameters
show listeners
Usage: show filters
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Show detailed information of all filters.
Field | Description
----- | -----------
Filter | Filter name
Module | The module that the filter uses
Services | Services that use the filter
Parameters | Filter parameters
Diagnostics | Filter diagnostics
show module
Usage: show module <module>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
This command shows all available parameters as well as detailed version information of a loaded module.
Field | Description
----- | -----------
Module | Module name
Type | Module type
Version | Module version
Maturity | Module maturity
Description | Short description about the module
Parameters | All the parameters that the module accepts
Commands | Commands that the module provides
show modules
Usage: show modules
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Displays detailed information about all modules.
Field | Description
----- | -----------
Module | Module name
Type | Module type
Version | Module version
Maturity | Module maturity
Description | Short description about the module
Parameters | All the parameters that the module accepts
Commands | Commands that the module provides
show maxscale
Usage: show maxscale
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
See `--help alter maxscale` for more details about altering MaxScale parameters.
Field | Description
----- | -----------
Version | MaxScale version
Commit | MaxScale commit ID
Started At | Time when MaxScale was started
Activated At | Time when MaxScale left passive mode
Uptime | Time MaxScale has been running
Config Sync | MaxScale configuration synchronization
Parameters | Global MaxScale parameters
show thread
Usage: show thread <thread>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Show detailed information about a worker thread.
Field | Description
----- | -----------
Id | Thread ID
Accepts | Number of TCP accepts done by this thread
Reads | Number of EPOLLIN events
Writes | Number of EPOLLOUT events
Hangups | Number of EPOLLHUP and EPOLLRDUP events
Errors | Number of EPOLLERR events
Avg event queue length | Average number of events returned by one epoll_wait call
Max event queue length | Maximum number of events returned by one epoll_wait call
Max exec time | The longest time spent processing events returned by a epoll_wait call
Max queue time | The longest time an event had to wait before it was processed
Current FDs | Current number of managed file descriptors
Total FDs | Total number of managed file descriptors
Load (1s) | Load percentage over the last second
Load (1m) | Load percentage over the last minute
Load (1h) | Load percentage over the last hour
QC cache size | Query classifier size
QC cache inserts | Number of times a new query was added into the query classification cache
QC cache hits | How many times a query classification was found in the query classification cache
QC cache misses | How many times a query classification was not found in the query classification cache
QC cache evictions | How many times a query classification result was evicted from the query classification cache
show threads
Usage: show threads
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Show detailed information about all worker threads.
Field | Description
----- | -----------
Id | Thread ID
Accepts | Number of TCP accepts done by this thread
Reads | Number of EPOLLIN events
Writes | Number of EPOLLOUT events
Hangups | Number of EPOLLHUP and EPOLLRDUP events
Errors | Number of EPOLLERR events
Avg event queue length | Average number of events returned by one epoll_wait call
Max event queue length | Maximum number of events returned by one epoll_wait call
Max exec time | The longest time spent processing events returned by a epoll_wait call
Max queue time | The longest time an event had to wait before it was processed
Current FDs | Current number of managed file descriptors
Total FDs | Total number of managed file descriptors
Load (1s) | Load percentage over the last second
Load (1m) | Load percentage over the last minute
Load (1h) | Load percentage over the last hour
QC cache size | Query classifier size
QC cache inserts | Number of times a new query was added into the query classification cache
QC cache hits | How many times a query classification was found in the query classification cache
QC cache misses | How many times a query classification was not found in the query classification cache
QC cache evictions | How many times a query classification result was evicted from the query classification cache
show logging
Usage: show logging
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
See `--help alter logging` for more details about altering logging parameters.
Field | Description
----- | -----------
Current Log File | The current log file MaxScale is logging into
Enabled Log Levels | List of log levels enabled in MaxScale
Parameters | Logging parameters
show commands
Usage: show commands <module>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
This command shows the parameters the command expects with the parameter descriptions.
Field | Description
----- | -----------
Command | Command name
Parameters | Parameters the command supports
Descriptions | Parameter descriptions
show qc_cache
Usage: show qc_cache
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Show contents (statement and hits) of query classifier cache.
show dbusers
Usage: show dbusers <service>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Show information about the database users of the service.
Field | Description
----- | -----------
User | The user name of the account
Host | The host of the account
Plugin | Authentication plugin
TLS | Whether TLS is required from this user
Super | Does the user have a SUPER grant
Global | Does the user have global database access
Proxy | Whether this is a proxy user
Role | The default role for this user
set
set server
Usage: set server <server> <state>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Set options:
--force If combined with the `maintenance` state, this forcefully closes all connections to the target server [boolean] [default: false]
Options:
--version Show version number [boolean]
--help Show help [boolean]
If <server> is monitored by a monitor, this command should only be used to set the server into the `maintenance` or the `drain` state. Any other states will be overridden by the monitor on the next monitoring interval. To manually control server states, use the `stop monitor <name>` command to stop the monitor before setting the server states manually.
When a server is set into the `drain` state, no new connections to it are allowed but existing connections are allowed to gracefully close. Servers with the `Master` status cannot be drained or set into maintenance mode. To clear a state set by this command, use the `clear server` command.
To forcefully close all connections to a server, use `set server <name> maintenance --force`
clear
clear server
Usage: clear server <server> <state>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
This command clears a server state set by the `set server <server> <state>` command
drain
drain server
Usage: drain server <server>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Drain options:
--drain-timeout Timeout for the drain operation in seconds. If exceeded, the server is added back to all services without putting it into maintenance mode. [number] [default: 90]
Options:
--version Show version number [boolean]
--help Show help [boolean]
This command drains the server of connections by first removing it from all services after which it waits until all connections are closed. When all connections are closed, the server is put into the `maintenance` state and added back to all the services where it was removed from. To take the server back into use, execute `clear server <server> maintenance`.
Warning: This command is not safe to interrupt. If interrupted, the servers might not be added back to the service. For a better alternative, use `set server <server> drain`. This command has been deprecated in MaxScale 6.0.
enable
enable log-priority
Usage: enable log-priority <log>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
The `debug` log priority is only available for debug builds of MaxScale.
disable
disable log-priority
Usage: disable log-priority <log>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
The `debug` log priority is only available for debug builds of MaxScale.
create
create server
Usage: create server <name> <host|socket> [port] [params...]
Create server options:
--services Link the created server to these services [array]
--monitors Link the created server to these monitors [array]
--protocol Protocol module name [string] [default: "mariadbbackend"]
--authenticator Authenticator module name (deprecated) [string]
--authenticator-options Option string for the authenticator (deprecated) [string]
--tls Enable TLS [boolean]
--tls-key Path to TLS key [string]
--tls-cert Path to TLS certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
--tls-version TLS version to use [string]
--tls-cert-verify-depth TLS certificate verification depth [number]
--tls-verify-peer-certificate Enable TLS peer certificate verification [boolean]
--tls-verify-peer-host Enable TLS peer host verification [boolean]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
The created server will not be used by any services or monitors unless the --services or --monitors options are given. The list of servers a service or a monitor uses can be altered with the `link` and `unlink` commands. If the <host|socket> argument is an absolute path, the server will use a local UNIX domain socket connection. In this case the [port] argument is ignored.
The recommended way of declaring parameters is with the new `key=value` syntax added in MaxScale 6.2.0. Note that for some parameters (e.g. `extra_port` and `proxy_protocol`) this is the only way to pass them.
create monitor
Usage: create monitor <name> <module> [params...]
Create monitor options:
--servers Link the created monitor to these servers. All non-option arguments after --servers are interpreted as server names e.g. `--servers srv1 srv2 srv3`. [array]
--monitor-user Username for the monitor user [string]
--monitor-password Password for the monitor user [string]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
The list of servers given with the --servers option should not contain any servers that are already monitored by another monitor. The last argument to this command is a list of key=value parameters given as the monitor parameters.
create service
Usage: service <name> <router> <params...>
Create service options:
--servers Link the created service to these servers. All non-option arguments after --servers are interpreted as server names e.g. `--servers srv1 srv2 srv3`. [array]
--filters Link the created service to these filters. All non-option arguments after --filters are interpreted as filter names e.g. `--filters f1 f2 f3`. [array]
--services Link the created service to these services. All non-option arguments after --services are interpreted as service names e.g. `--services svc1 svc2 svc3`. [array]
--cluster Link the created service to this cluster (i.e. a monitor) [string]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
The last argument to this command is a list of key=value parameters given as the service parameters. If the --servers, --services or --filters options are used, they must be defined after the service parameters. The --cluster option is mutually exclusive with the --servers and --services options.
Note that the `user` and `password` parameters must be defined.
create filter
Usage: filter <name> <module> [params...]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
The last argument to this command is a list of key=value parameters given as the filter parameters.
create listener
Usage: create listener <service> <name> <port> [params...]
Create listener options:
--interface Interface to listen on [string] [default: "::"]
--protocol Protocol module name [string] [default: "mariadbclient"]
--authenticator Authenticator module name [string]
--authenticator-options Option string for the authenticator [string]
--tls-key Path to TLS key [string]
--tls-cert Path to TLS certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
--tls-version TLS version to use [string]
--tls-crl TLS CRL to use [string]
--tls-cert-verify-depth TLS certificate verification depth [number]
--tls-verify-peer-certificate Enable TLS peer certificate verification [boolean]
--tls-verify-peer-host Enable TLS peer host verification [boolean]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
The new listener will be taken into use immediately. The last argument to this command is a list of key=value parameters given as the listener parameters. These parameters override any parameters set via command line options: e.g. using `protocol=mariadb` will override the `--protocol=cdc` option.
create user
Usage: create user <name> <password>
Create user options:
--type Type of user to create [string] [choices: "admin", "basic"] [default: "basic"]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
By default the created user will have read-only privileges. To make the user an administrative user, use the `--type=admin` option. Basic users can only perform `list` and `show` commands.
create report
Usage: create report <file>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
The generated report contains the state of all the objects in MaxScale as well as all other required information needed to diagnose problems.
destroy
destroy server
Usage: destroy server <name>
Destroy options:
--force Remove the server from monitors and services before destroying it [boolean] [default: false]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
The server must be unlinked from all services and monitor before it can be destroyed.
destroy monitor
Usage: destroy monitor <name>
Destroy options:
--force Remove monitored servers from the monitor before destroying it [boolean] [default: false]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
The monitor must be unlinked from all servers before it can be destroyed.
destroy listener
Usage: destroy listener { <listener> | <service> <listener> }
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Destroying a listener closes the listening socket, opening it up for immediate reuse. If only one argument is given and it is the name of a listener, it is unconditionally destroyed. If two arguments are given and they are a service and a listener, the listener is only destroyed if it is for the given service.
destroy service
Usage: destroy service <name>
Destroy options:
--force Remove filters, listeners and servers from service before destroying it [boolean] [default: false]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
The service must be unlinked from all servers and filters. All listeners for the service must be destroyed before the service itself can be destroyed.
destroy filter
Usage: destroy filter <name>
Destroy options:
--force Automatically remove the filter from all services before destroying it [boolean] [default: false]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
The filter must not be used by any service when it is destroyed.
destroy user
Usage: destroy user <name>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
The last remaining administrative user cannot be removed. Create a replacement administrative user before attempting to remove the last administrative user.
link
link service
Usage: link service <name> <target...>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
This command links targets to a service, making them available for any connections that use the service. A target can be a server, another service or a cluster (i.e. a monitor). Before a server is linked to a service, it should be linked to a monitor so that the server state is up to date. Newly linked targets are only available to new connections, existing connections will use the old list of targets. If a monitor (a cluster of servers) is linked to a service, the service must not have any other targets linked to it.
link monitor
Usage: link monitor <name> <server...>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Linking a server to a monitor will add it to the list of servers that are monitored by that monitor. A server can be monitored by only one monitor at a time.
unlink
unlink service
Usage: unlink service <name> <target...>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
This command unlinks targets from a service, removing them from the list of available targets for that service. New connections to the service will not use the unlinked targets but existing connections can still use the targets. A target can be a server, another service or a cluster (a monitor).
unlink monitor
Usage: unlink monitor <name> <server...>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
This command unlinks servers from a monitor, removing them from the list of monitored servers. The servers will be left in their current state when they are unlinked from a monitor.
start
start service
Usage: start service <name>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
This starts a service stopped by `stop service <name>`
start listener
Usage: start listener <name>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
This starts a listener stopped by `stop listener <name>`
start monitor
Usage: start monitor <name>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
This starts a monitor stopped by `stop monitor <name>`
start services
Usage: start [services|maxscale]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
This command will execute the `start service` command for all services in MaxScale.
stop
stop service
Usage: stop service <name>
Stop options:
--force Close existing connections after stopping the service [boolean] [default: false]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Stopping a service will prevent all the listeners for that service from accepting new connections. Existing connections will still be handled normally until they are closed.
stop listener
Usage: stop listener <name>
Stop options:
--force Close existing connections after stopping the listener [boolean] [default: false]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Stopping a listener will prevent it from accepting new connections. Existing connections will still be handled normally until they are closed.
stop monitor
Usage: stop monitor <name>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Stopping a monitor will pause the monitoring of the servers. This can be used to manually control server states with the `set server` command.
stop services
Usage: stop [services|maxscale]
Stop options:
--force Close existing connections after stopping all services [boolean] [default: false]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
This command will execute the `stop service` command for all services in MaxScale.
alter
alter server
Usage: alter server <server> <key=value> ...
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
To display the server parameters, execute `show server <server>`.
The parameters should be given in the `key=value` format. This command also supports the legacy method
of passing parameters as `key value` pairs but the use of this is not recommended.
alter monitor
Usage: alter monitor <monitor> <key=value> ...
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
To display the monitor parameters, execute `show monitor <monitor>`
The parameters should be given in the `key=value` format. This command also supports the legacy method
of passing parameters as `key value` pairs but the use of this is not recommended.
alter service
Usage: alter service <service> <key=value> ...
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
To display the service parameters, execute `show service <service>`. Some routers support runtime configuration changes to all parameters. Currently all readconnroute, readwritesplit and schemarouter parameters can be changed at runtime. In addition to module specific parameters, the following list of common service parameters can be altered at runtime:
[
"user",
"passwd",
"enable_root_user",
"max_connections",
"connection_timeout",
"auth_all_servers",
"optimize_wildcard",
"strip_db_esc",
"max_slave_connections",
"max_slave_replication_lag",
"retain_last_statements"
]
The parameters should be given in the `key=value` format. This command also supports the legacy method
of passing parameters as `key value` pairs but the use of this is not recommended.
alter service-filters
Usage: alter service-filters <service> [filters...]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
The order of the filters given as the second parameter will also be the order in which queries pass through the filter chain. If no filters are given, all existing filters are removed from the service.
For example, the command `maxctrl alter service filters my-service A B C` will set the filter chain for the service `my-service` so that A gets the query first after which it is passed to B and finally to C. This behavior is the same as if the `filters=A|B|C` parameter was defined for the service.
The parameters should be given in the `key=value` format. This command also supports the legacy method
of passing parameters as `key value` pairs but the use of this is not recommended.
alter filter
Usage: alter filter <filter> <key=value> ...
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
To display the filter parameters, execute `show filter <filter>`. Some filters support runtime configuration changes to all parameters. Refer to the filter documentation for details on whether it supports runtime configuration changes and which parameters can be altered.
The parameters should be given in the `key=value` format. This command also supports the legacy method
of passing parameters as `key value` pairs but the use of this is not recommended.
Note: To pass options with dashes in them, surround them in both single and double quotes:
maxctrl alter filter my-namedserverfilter target01 '"->master"'
alter listener
Usage: alter listener <listener> <key=value> ...
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
To display the listener parameters, execute `show listener <listener>`
The parameters should be given in the `key=value` format. This command also supports the legacy method
of passing parameters as `key value` pairs but the use of this is not recommended.
alter logging
Usage: alter logging <key=value> ...
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
To display the logging parameters, execute `show logging`
The parameters should be given in the `key=value` format. This command also supports the legacy method
of passing parameters as `key value` pairs but the use of this is not recommended.
alter maxscale
Usage: alter maxscale <key=value> ...
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
To display the MaxScale parameters, execute `show maxscale`. The following list of parameters can be altered at runtime:
[
"auth_connect_timeout",
"auth_read_timeout",
"auth_write_timeout",
"admin_auth",
"admin_log_auth_failures",
"passive",
"ms_timestamp",
"skip_permission_checks",
"query_retries",
"query_retry_timeout",
"retain_last_statements",
"dump_last_statements"
]
The parameters should be given in the `key=value` format. This command also supports the legacy method
of passing parameters as `key value` pairs but the use of this is not recommended.
alter user
Usage: alter user <name> <password>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Changes the password for a user. To change the user type, destroy the user and then create it again.
alter session
Usage: alter session <session> <key=value> ...
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Alter parameters of a session. To get the list of modifiable parameters, use `show session <session>`
The parameters should be given in the `key=value` format. This command also supports the legacy method
of passing parameters as `key value` pairs but the use of this is not recommended.
alter session-filters
Usage: alter session-filters <session> [filters...]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
The order of the filters given as the second parameter will also be the order in which queries pass through the filter chain. If no filters are given, all existing filters are removed from the session. The syntax is similar to `alter service-filters`.
rotate
rotate logs
Usage: rotate logs
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
This command is intended to be used with the `logrotate` command.
reload
reload service
Usage: reload service <service>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
call
call command
Usage: call command <module> <command> [params...]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
To inspect the list of module commands, execute `list commands`
cluster
cluster diff
Usage: cluster diff <target>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
The list of host servers is controlled with the --hosts option. The target server should not be in the host list. Value of <target> must be in HOST:PORT format
cluster sync
Usage: cluster sync <target>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
Options:
--version Show version number [boolean]
--help Show help [boolean]
This command will alter all MaxScale instances given in the --hosts option to represent the <target> MaxScale. Value of <target> must be in HOST:PORT format. Synchronization can be attempted again if a previous attempt failed due to a network failure or some other ephemeral error. Any other errors require manual synchronization of the MaxScale configuration files and a restart of the failed Maxscale.
Note: New objects created by `cluster sync` will have a placeholder value and must be manually updated. Passwords for existing objects will not be updated by `cluster sync` and must also be manually updated.
api
api get
Usage: get <resource> [path]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
API options:
--sum Calculate sum of API result. Only works for arrays of numbers e.g. `api get --sum servers data[].attributes.statistics.connections`. [boolean] [default: false]
--pretty Pretty-print output. [boolean] [default: false]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Perform a raw REST API call. The path definition uses JavaScript syntax to extract values. For example, the following command extracts all server states as an array of JSON values: maxctrl api get servers data[].attributes.state
api post
Usage: post <resource> <value>
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
API options:
--sum Calculate sum of API result. Only works for arrays of numbers e.g. `api get --sum servers data[].attributes.statistics.connections`. [boolean] [default: false]
--pretty Pretty-print output. [boolean] [default: false]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Perform a raw REST API call. The provided value is passed as-is to the REST API after building it with JSON.parse
api patch
Usage: patch <resource> [path]
Global Options:
-c, --config MaxCtrl configuration file [string] [default: "~/.maxctrl.cnf"]
-u, --user Username to use [string] [default: "admin"]
-p, --password Password for the user. To input the password manually, use -p '' or --password='' [string] [default: "mariadb"]
-h, --hosts List of MaxScale hosts. The hosts must be in HOST:PORT format and each value must be separated by a comma. [string] [default: "127.0.0.1:8989"]
-t, --timeout Request timeout in plain milliseconds, e.g '-t 1000', or as duration with suffix [h|m|s|ms], e.g. '-t 10s' [string] [default: "10000"]
-q, --quiet Silence all output. Ignored while in interactive mode. [boolean] [default: false]
--tsv Print tab separated output [boolean] [default: false]
--skip-sync Disable configuration synchronization for this command [boolean] [default: false]
HTTPS/TLS Options:
-s, --secure Enable HTTPS requests [boolean] [default: false]
--tls-key Path to TLS private key [string]
--tls-passphrase Password for the TLS private key [string]
--tls-cert Path to TLS public certificate [string]
--tls-ca-cert Path to TLS CA certificate [string]
-n, --tls-verify-server-cert Whether to verify server TLS certificates [boolean] [default: true]
API options:
--sum Calculate sum of API result. Only works for arrays of numbers e.g. `api get --sum servers data[].attributes.statistics.connections`. [boolean] [default: false]
--pretty Pretty-print output. [boolean] [default: false]
Options:
--version Show version number [boolean]
--help Show help [boolean]
Perform a raw REST API call. The provided value is passed as-is to the REST API after building it with JSON.parse
classify
Content reproduced on this site is the property of its respective owners,
and this content is not reviewed in advance by MariaDB. The views, information and opinions
expressed by this content do not necessarily represent those of MariaDB or any other party.
