The Ultimate Guide to High Availability with MariaDB
This is a read-only copy of the MariaDB Knowledgebase generated on 2024-11-22. For the latest, interactive version please visit https://mariadb.com/kb/.

Limitations and Known Issues within MariaDB MaxScale

Limitations and Known Issues within MariaDB MaxScale

This document lists known issues and limitations in MariaDB MaxScale and its plugins. Since limitations are related to specific plugins, this document is divided into several sections.

Configuration limitations

In versions 2.1.2 and earlier, the configuration files are limited to 1024 characters per line. This limitation was increased to 16384 characters in MaxScale 2.1.3. MaxScale 2.3.0 increased this limit to 16777216 characters.

In versions 2.2.12 and earlier, the section names in the configuration files were limited to 49 characters. This limitation was increased to 1023 characters in MaxScale 2.2.13.

Security limitiations

MariaDB 10.2

The parser of MaxScale correctly parses WITH statements, but fails to collect columns, functions and tables used in the SELECT defining the WITH clause.

Consequently, the database firewall will not block WITH statements where the SELECT of the WITH clause refers to forbidden columns.

Query Classification

Follow the MXS-1350 Jira issue to track the progress on this limitation.

XA transactions are not detected as transactions by MaxScale. This means that all XA commands will be treated as unknown commands and will be treated as operations that potentially modify the database (in the case of readwritesplit, the statements are routed to the master).

MaxScale will not track the XA transaction state which means that any SELECT queries done inside an XA transaction can be routed to servers that are not part of the XA transaction.

This limitation can be avoided on the client side by disabling autocommit before any XA transactions are done. The following example shows how a simple XA transaction is done via MaxScale by disabling autocommit for the duration of the XA transaction.

SET autocommit=0;
XA START 'MyXA';
INSERT INTO test.t1 VALUES(1);
XA END 'MyXA';
XA PREPARE 'MyXA';
XA COMMIT 'MyXA';
SET autocommit=1;

Prepared Statements

For its proper functioning, MaxScale needs in general to be aware of the transaction state and autocommit mode. In order to be that, MaxScale parses statements going through it.

However, if a transaction is commited or rolled back, or the autocommit mode is changed using a prepared statement, MaxScale will miss that and its internal state will be incorrect, until the transaction state or autocommit mode is changed using an explicit statement.

For instance, after the following sequence of commands, MaxScale will still think autocommit is on:

set autocommit=1
PREPARE hide_autocommit FROM "set autocommit=0"
EXECUTE hide_autocommit

To ensure that MaxScale functions properly, do not commit or rollback a transaction or change the autocommit mode using a prepared statement.

Protocol limitations

Limitations with MySQL/MariaDB Protocol support (MariaDBClient)

  • Compression is not included in the server handshake.

  • MariaDB MaxScale does not support KILL QUERY ID <query_id> type statements. If a query by a query ID is to be killed, it needs to be done directly on the backend databases.

  • The KILL commands are executed asynchronously and the results are ignored. Due to this, they will always appear to succeed even if the user is lacking the permissions.

Authenticator limitations

Limitations in the GSSAPI authenticator

Currently, MariaDB MaxScale only supports GSSAPI authentication when the backend connections use GSSAPI authentication. Client side GSSAPI authentication with a different backend authentication module is not supported.

Limitations in the MySQL authenticator (MySQLAuth)

  • MySQL old style passwords are not supported. MySQL versions 4.1 and newer use a new authentication protocol which does not support pre-4.1 style passwords.

  • When users have different passwords based on the host from which they connect MariaDB MaxScale is unable to determine which password it should use to connect to the backend database. This results in failed connections and unusable usernames in MariaDB MaxScale.

  • Only a subset of netmasks are supported for the Host-column in the mysql.user-table (and related tables). Specifically, if the Host is of the form base_ip/netmask, then the netmask must only contain the numbers 0 or 255. For example, a netmask of 255.255.255.0 is fine while 255.255.255.192 is not.

Filter limitations

Database Firewall limitations (dbfwfilter)

The Database Firewall filter does not support multi-statements. Using them will result in an error being sent to the client.

Tee filter limitations (tee)

The Tee filter does not support binary protocol prepared statements. The execution of a prepared statements through a service that uses the tee filter is not guaranteed to succeed on the service where the filter branches to as it does on the original service.

This possibility exists due to the fact that the binary protocol prepared statements are identified by a server-generated ID. The ID sent to the client from the main service is not guaranteed to be the same that is sent by the branch service.

Monitor limitations

A server can only be monitored by one monitor. Two or more monitors monitoring the same server is considered an error.

Limitations with Galera Cluster Monitoring (galeramon)

The default master selection is based only on MIN(wsrep_local_index). This can be influenced with the server priority mechanic described in the Galera Monitor manual.

Router limitations

Avrorouter limitations (avrorouter)

The avrorouter does not support the following data types, conversions or SQL statements:

The avrorouter does not do any crash recovery. This means that the avro files need to be truncated to valid block lengths before starting the avrorouter.

Binlog Checksums

The avrorouter does not support binlog checksums. They must must not be used in any of the binlogs that the avrorouter will process.

Follow MXS-1341 for progress on this issue.

Limitations in the connection router (readconnroute)

Sending of binary data with LOAD DATA LOCAL INFILE is not supported.

Limitations in the Read/Write Splitter (readwritesplit)

Read queries are routed to the master server in the following situations:

  • query is executed inside an open transaction
  • statement includes a stored procedure or an UDF call
  • if there are multiple statements inside one query e.g. INSERT INTO ... ; SELECT LAST_INSERT_ID();

JDBC Batched Statements

Readwritesplit does not support pipelining of JDBC batched statements. This is caused by the fact that readwritesplit executes the statements one at a time to track the state of the response.

Limitations in multi-statement handling

When a multi-statement query is executed through the readwritesplit router, it will always be routed to the master. See strict_multi_stmt for more details.

Execution of LOAD DATA LOCAL INFILE statements inside a multi-statement query is not supported. If one is executed MaxScale will most likely hang (see MXS-1828).

Limitations in client session handling

Some of the queries that a client sends are routed to all backends instead of just to one. These queries include USE <db name> and SET autocommit=0, among many others. Readwritesplit sends a copy of these queries to each backend server and forwards the master's reply to the client. Below is a list of MySQL commands which are classified as session commands.

COM_INIT_DB (USE <db name> creates this)
COM_CHANGE_USER
COM_STMT_CLOSE
COM_STMT_SEND_LONG_DATA
COM_STMT_RESET
COM_STMT_PREPARE
COM_QUIT (no response, session is closed)
COM_REFRESH
COM_DEBUG
COM_PING
SQLCOM_CHANGE_DB (USE ... statements)
SQLCOM_DEALLOCATE_PREPARE
SQLCOM_PREPARE
SQLCOM_SET_OPTION
SELECT ..INTO variable|OUTFILE|DUMPFILE
SET autocommit=1|0

Prior to MaxScale 2.3.0, session commands that were 2²⁴ - 1 bytes or longer were not supported and caused the session to be closed.

There is a possibility for misbehavior. If USE mytable is executed in one of the slaves and fails, it may be due to replication lag rather than the database not existing. Thus, the same command may produce different result in different backend servers. The slaves which fail to execute a session command will be dropped from the active list of slaves for this session to guarantee a consistent session state across all the servers used by the session. In addition, the server will not used again for routing for the duration of the session.

The above-mentioned behavior for user variables can be partially controlled with the configuration parameter use_sql_variables_in:

use_sql_variables_in=[master|all] (default: all)

WARNING

If a SELECT query modifies a user variable when the use_sql_variables_in parameter is set to all, it will not be routed and the client will receive an error. A log message is written into the log further explaining the reason for the error. Here is an example use of a SELECT query which modifies a user variable and how MariaDB MaxScale responds to it.

MySQL [(none)]> set @id=1;
Query OK, 0 rows affected (0.00 sec)

MySQL [(none)]> SELECT @id := @id + 1 FROM test.t1;
ERROR 1064 (42000): Routing query to backend failed. See the error log for further details.

Allow user variable modification in SELECT queries by setting use_sql_variables_in=master. This will route all queries that use user variables to the master.

Schemarouter limitations (schemarouter)

Please see SchemaRouter documentation.

Content reproduced on this site is the property of its respective owners, and this content is not reviewed in advance by MariaDB. The views, information and opinions expressed by this content do not necessarily represent those of MariaDB or any other party.