Connection Routing with Galera Cluster

Environment & Solution Space

The object of this tutorial is to have a system that has two ports available, one for write connections to the database cluster and the other for read connections to the database.

Setting up MariaDB MaxScale

The first part of this tutorial is covered in MariaDB MaxScale Tutorial. Please read it and follow the instructions for setting up MariaDB MaxScale with the type of cluster you want to use.

Once you have MariaDB MaxScale installed and the database users created, we can create the configuration file for MariaDB MaxScale.

Creating Your MariaDB MaxScale Configuration

MariaDB MaxScale configuration is held in an ini file that is located in the file maxscale.cnf in the directory /etc, if you have installed in the default location then this file is available in /etc/maxscale.cnf. This is not created as part of the installation process and must be manually created. A template file does exist within the /usr/share/maxscale directory that may be use as a basis for your configuration.

A global, maxscale, section is included within every MariaDB MaxScale configuration file; this is used to set the values of various MariaDB MaxScale wide parameters, perhaps the most important of these is the number of threads that MariaDB MaxScale will use to execute the code that forwards requests and handles responses for clients.

[maxscale]
threads=4

Since we are using Galera Cluster and connection routing we want a single to which the client application can connect; MariaDB MaxScale will then route connections to this port onwards to the various nodes within the Galera Cluster. To achieve this within MariaDB MaxScale we need to define a service in the ini file. Create a section for each in your MariaDB MaxScale configuration file and set the type to service, the section name is the names of the service and should be meaningful to the administrator. Names may contain whitespace.

[Galera Service]
type=service

The router for this section the readconnroute module, also the service should be provided with the list of servers that will be part of the cluster. The server names given here are actually the names of server sections in the configuration file and not the physical hostnames or addresses of the servers.

[Galera Service]
type=service
router=readconnroute
servers=dbserv1, dbserv2, dbserv3

In order to instruct the router to which servers it should route we must add router options to the service. The router options are compared to the status that the monitor collects from the servers and used to restrict the eligible set of servers to which that service may route. In our case we use the option that restricts us to servers that are fully functional members of the Galera cluster which are able to support SQL operations on the cluster. To achieve this we use the router option synced.

[Galera Service]
type=service
router=readconnroute
router_options=synced
servers=dbserv1, dbserv2, dbserv3

The final step in the service section is to add the username and password that will be used to populate the user data from the database cluster. There are two options for representing the password, either plain text or encrypted passwords may be used. In order to use encrypted passwords a set of keys must be generated that will be used by the encryption and decryption process. To generate the keys use the maxkeys command and pass the name of the secrets file in which the keys are stored.

% maxkeys /var/lib/maxscale/.secrets
%

Once the keys have been created the maxpasswd command can be used to generate the encrypted password.

% maxpasswd plainpassword
96F99AA1315BDC3604B006F427DD9484
%

The username and password, either encrypted or plain text, are stored in the service section using the user and passwd parameters.

[Galera Service]
type=service
router=readconnroute
router_options=synced
servers=dbserv1, dbserv2, dbserv3
user=maxscale
passwd=96F99AA1315BDC3604B006F427DD9484

This completes the definitions required by the service, however listening ports must be associated with a service in order to allow network connections. This is done by creating a series of listener sections. These sections again are named for the convenience of the administrator and should be of type listener with an entry labeled service which contains the name of the service to associate the listener with. Each service may have multiple listeners.

[Galera Listener]
type=listener
service=Galera Service

A listener must also define the protocol module it will use for the incoming network protocol, currently this should be the MySQLClient protocol for all database listeners. The listener may then supply a network port to listen on and/or a socket within the file system.

[Galera Listener]
type=listener
service=Galera Service
protocol=MySQLClient
port=4306
socket=/tmp/DB.Cluster

An address parameter may be given if the listener is required to bind to a particular network address when using hosts with multiple network addresses. The default behavior is to listen on all network interfaces.

The next stage is the configuration is to define the server information. This defines how to connect to each of the servers within the cluster, again a section is created for each server, with the type set to server, the network address and port to connect to and the protocol to use to connect to the server. Currently the protocol for all database connections in MySQLBackend.

[dbserv1]
type=server
address=192.168.2.1
port=3306
protocol=MySQLBackend

[dbserv2]
type=server
address=192.168.2.2
port=3306
protocol=MySQLBackend

[dbserv3]
type=server
address=192.168.2.3
port=3306
protocol=MySQLBackend

In order for MariaDB MaxScale to monitor the servers using the correct monitoring mechanisms a section should be provided that defines the monitor to use and the servers to monitor. Once again a section is created with a symbolic name for the monitor, with the type set to monitor. Parameters are added for the module to use, the list of servers to monitor and the username and password to use when connecting to the servers with the monitor.

[Galera Monitor]
type=monitor
module=galeramon
servers=dbserv1, dbserv2, dbserv3
user=maxscale
passwd=96F99AA1315BDC3604B006F427DD9484

As with the password definition in the server either plain text or encrypted passwords may be used.

The final stage in the configuration is to add the option service which is used by the maxadmin command to connect to MariaDB MaxScale for monitoring and administration purposes. This creates a service section and a listener section.

[CLI]
type=service
router=cli
[CLI Listener]
type=listener
service=CLI
protocol=maxscaled
socket=default

Starting MariaDB MaxScale

Upon completion of the configuration process MariaDB MaxScale is ready to be started for the first time. This may either be done manually by running the maxscale command or via the service interface.

% maxscale

or

% service maxscale start

Check the error log in /var/log/maxscale to see if any errors are detected in the configuration file and to confirm MariaDB MaxScale has been started. Also the maxadmin command may be used to confirm that MariaDB MaxScale is running and the services, listeners etc have been correctly configured.

% maxadmin list services

Services.
--------------------------+----------------------+--------+---------------
Service Name              | Router Module        | #Users | Total Sessions
--------------------------+----------------------+--------+---------------
Galera Service            | readconnroute        |      1 |     1
CLI                       | cli                  |      2 |     2
--------------------------+----------------------+--------+---------------
% maxadmin list servers
Servers.
-------------------+-----------------+-------+-------------+-------------------
Server             | Address         | Port  | Connections | Status
-------------------+-----------------+-------+-------------+--------------------
dbserv1            | 192.168.2.1     |  3306 |           0 | Running, Synced, Master
dbserv2            | 192.168.2.2     |  3306 |           0 | Running, Synced, Slave
dbserv3            | 192.168.2.3     |  3306 |           0 | Running, Synced, Slave
-------------------+-----------------+-------+-------------+--------------------

A Galera Cluster is a multi-master clustering technology, however the monitor is able to impose false notions of master and slave roles within a Galera Cluster in order to facilitate the use of Galera as if it were a standard MariaDB Replication setup. This is merely an internal MariaDB MaxScale convenience and has no impact on the behavior of the cluster.

You can control which Galera node is the master server by using the priority mechanism of the Galera Monitor module. For more details, read the Galera Monitor documentation.

% maxadmin list listeners

Listeners.
---------------------+--------------------+-----------------+-------+--------
Service Name         | Protocol Module    | Address         | Port  | State
---------------------+--------------------+-----------------+-------+--------
Galera Service       | MySQLClient        | *               |  4306 | Running
CLI                  | maxscaled          | localhost       |  6603 | Running
---------------------+--------------------+-----------------+-------+--------
%

MariaDB MaxScale is now ready to start accepting client connections and routing them to the master or slaves within your cluster. Other configuration options are available that can alter the criteria used for routing, such as using weights to obtain unequal balancing operations. These options may be found in the MariaDB MaxScale Configuration Guide. More detail on the use of maxadmin can be found in the document "MaxAdmin - The MariaDB MaxScale Administration & Monitoring Client Application".